Watch our step-by-step instruction video to help you properly Tighten the KD Cams.
KD cams (Knock Down cams) are essential components used in furniture assembly to securely join pieces of wood. Properly tightening KD cams ensures a stable and durable assembly. Follow the steps below to correctly tighten KD cams:
1. Understand the Assembly Components: KD cams typically consist of two main parts: a washer/cam and a rod/bolt. These components work together to clamp and hold pieces of wood firmly in place.
2. Insert the Rod/Bolt:
- Begin by inserting the rod or bolt into the designated hole in one piece of wood. Ensure it is positioned correctly for alignment with the KD cam.
3. Place and Align the KD Cam:
- Insert the KD cam into the corresponding hole on the adjacent piece of wood. The opening in the KD cam should align perfectly with the rod or bolt inserted in step 2.
4. Tightening the KD Cam:
- Use a flathead screwdriver to tighten the KD cam. Insert the screwdriver into the slot on the washer/cam.
- Begin turning the KD cam clockwise. Gradually increase the pressure as you turn to ensure a snug fit.
- Rotate the KD cam to approximately the 2 o’clock position. This position helps in securely clamping the pieces of wood together.
5. Applying Final Pressure:
- To ensure the KD cam is properly tightened, apply a little additional pressure once it reaches the 2 o’clock position. This step ensures that the joint is firmly held together without over-tightening, which could potentially damage the cam or the wood.
Additional Tips:
-
Avoid Over-Tightening: Excessive force when tightening the KD cam can lead to damage. Apply firm pressure gradually and check the stability of the joint periodically.
-
Check Alignment: Before final tightening, ensure that all parts are aligned correctly. Misalignment can affect the stability and appearance of the assembled furniture.
Troubleshooting:
-
Looseness: If you notice that the joint feels loose after tightening, double-check the alignment and consider re-tightening the KD cam with slightly more pressure.
-
Damage to Cam or Wood: If the KD cam or the wood shows signs of damage during assembly, please contact our Consumer Service Team for assistance.
Contact Us for Assistance: If you have any questions or need further assistance, please contact our Consumer Service Team:
- Consumer Service Phone Number: 800-950-4782
- Email: consumerservice@esolutionsfurniture.com
By following these steps and tips, you can effectively tighten KD cams during furniture assembly, ensuring a secure and professional finish. If you have any further questions or encounter difficulties, don’t hesitate to consult the assembly instructions provided with your furniture or contact our consumer service team for assistance.
Note: This information is current as of 8/7/2024. For the latest updates or specific inquiries about your product, please contact our Consumer Service Team or visit our website.